Software and website Copyright AlpineSoft, 2023. You can also reset the default playback device (as used by all other applications) by clicking on Change Default Playback Device in this dialog. If this happens to you, you can change the playback device VinylStudio uses from the Change Playback Device dialog under the Options menu. If you don't hear anything when recording or playing your tracks, it may be bcause some USB devices change the default playback device (to themselves) when they are plugged in for the first time which means that, in effect, your speakers stop working. ![]() If Your Computer's Speakers are not Working check that the recording level slider is not set at zero.on Windows XP, try selecting a different Sound Card in the dropdown box.try selecting a different Input Device in the dropdown box.If no sound is getting through, a bit of experimentation might be needed: If you check the 'Monitor Recording' box (or sometimes even if you don't), you should hear what you are recording played back through your computer's speakers. The cable you need is a 3.5mm Jack to Twin Phono Lead: Run a cable from this socket to the the line-in socket on your computer, usually colour-coded blue, on a PC or marked as shown in the photo on a Mac. If your turntable is already connected to a Hi-Fi, there should be a phono socket on the back labeled REC OUT, or TAPE REC or similar (if you have a tape deck connected to your Hi-Fi, this socket will be in use, so you will need to disconnect it). Many of these have no line in socket either. You may also need to buy one of these if you are using a laptop. In this case you will need to purchase a USB device. Please note that many newer Macs don't have a line in socket. If you've switched to known good tubes and eliminated nearby environmental sources of noise, my guess would be more on a bad connection somewhere - loose circuit board trace, bad solder connection on in input output jack, maybe a loose tube socket. In all cases, you can monitor what you are recording through your computer's speakers. Ground loop would be giving you hum and buzz. You can also use a USB turntable, cassette deck or other USB device. This can be achieved either by running a cable from your Hi-Fi, or by using a Phono Pre-amp (which you will have to purchase separately). To record vinyl albums (or 78s) you will need to hook up your record deck to your sound card or other input device. Connecting up your Turntable or Tape Deck (Archive)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |